Decoder
EE360 Airborne Decoder System
EE350 Telemetry Decoder System
The EE350 Telemetry Decoder System covers the IRIG 106-01 PCM standard class I-II and Arinc 573. Asynchronous embedded packets decoding is included. The EE350 system consists of plug-in boards for the common PC 32 bit PCI bus and Windows System Software. All functions from the raw bitstream to presentation, data storage and analysis are covered.
Signals are scaled to physical parameter, including math formula, calibration table and combination of masked words. Storage of microseconds time tagged PCM data to disk are controlled by time, limit check or external event. Pretrigger, multiple sequence and endless loop recording are included.
The EE350 is based on more than 30 years of PCM decoder experience at EIDEL.
The EE360 was developed for UAV control. It can also be used a ground system with the possibility to connect through a USB 2.0 port.
The system has implemented the IRIG106-01 PCM standard class I, it can also include a bitsynchroniser.The bitsynchroniser can also be offered as a stand alone solution.
The EE360 system offers a new and user friendly Windows user interface for setup and control
| Features | |
| The EE360 Airborne Decoder System consists of a decoder and a bit synchroniser |  |
| It can be configured as a Decoder only, a stand alone bit synchroniser or a decoder with bit synchroniser. | |
| The system covers frame/ format synchronisation, signal selection and data routing towards the different output interfaces. | |
| Serial data and bit lock are received from the internal bitsynchroniser or an external source. | |
| PCM Decoder | Bitsynchroniser |
| Complete decoder in a small rugged box | Up to 20 Mbps |
| USB 2.0 interface for both control and setup. | Stand alone or in addition to decoder |
| Selection of different digital input signals as RS422 | Bitsynchroniser for all IRIG-106 codes |
| TTL single ended or from a bitsynchroniser. | Selection of different analogue or digital input signals. |
| Frame and format synchroniser up to 20 Mbps | Selection of different internal Sync strategies |
| PCM digital parallel data output port with word address | Status analogue /digital outputs (Lock). |
| NRZ and CP output to Decoder | |
| Optional functions | |
| Data output via USB 2.0 interface to external Control/Display application | |
| Support of IRIG-106 Class II | |
| Additional analogue output channels | |
 | |
| |
EE350 Telemetry Decoder System
The EE350 Telemetry Decoder System covers the IRIG 106-01 PCM standard class I-II and Arinc 573. Asynchronous embedded packets decoding is included. The EE350 system consists of plug-in boards for the common PC 32 bit PCI bus and Windows System Software. All functions from the raw bitstream to presentation, data storage and analysis are covered.
Signals are scaled to physical parameter, including math formula, calibration table and combination of masked words. Storage of microseconds time tagged PCM data to disk are controlled by time, limit check or external event. Pretrigger, multiple sequence and endless loop recording are included.
The EE350 is based on more than 30 years of PCM decoder experience at EIDEL.